Hello Khadas Community!
This month of March contains new software and hardware releases for Khadas single board computers. As always, these updates were created in response to requests and feedback from the Khadas Community. We are glad to be of service to you!
Software:
Published new VIM4 Android image
Hardware:
Released VIM4 v13 and Edge2 v12 single board computers
In-stock, Edge2 ARM PC
Limited-time sale for Edge2 DIY Case
Released Edge2 Station
Released USB-A to C LPS (Linear Power Supply) cable
Released VIM4 v13 and Edge2 v12 single board computers
Due to shortages of the TPS2121RUXR chip, we’ve modified VIM4 and Edge2 to utilise the WS4684C chip instead. The WS4684C takes over the role of power source switching. The updated versions are labelled v13 and v12 respectively. Please see this blog to understand the impacts of this change.
In-stock, Edge2 ARM PC. No more waiting!
You’ll be delighted to know that the second batch of Edge2 ARM PCs has been shipped out to customers on March 15th. And the Edge2 ARM PC is also now in-stock at Khadas Shop.
Limited-time sale, Edge2 Case
To show our appreciation to customers that ordered the bare-board Edge2 on the first day it was released, we are now offering a limited-time sale for the Edge2 Case from March 21st to April 21st! With the Edge2 Case, you can convert your bare-board Edge2 into a beautiful Edge2 ARM PC! Check out the video below for DIY assembly instructions:
Edge2 Station
The Edge2 Station is a dock for your Edge2 ARM PC. This dock adds 10/100M ethernet, a 3.5mm headphone jack, UART for debugging, external audio DAC, and more. Pogo pads located on the underside of your Edge2 ARM PC enable it to dock with the Edge2 Station.
Documentation:
Edge2 Station is now available via Khadas Shop, and brings the total number of Edge2 accessories to 2; Edge2 IO and Edge2 Station.
Expand the possibilities for your Edge2:
USB-A to C LPS (Linear Power Supply) Cable
Use the USB-A to C LPS cable to connect your Tone2 Series DAC to an LPS (Linear Power Supply). A high quality cable for audiophiles with a wear-resistant woven sheath and TPE cladding.
Features:
Connect a Tone2 Series DAC to a USB-A Linear Power Supply
Maximum supported current of 1.5A
Wear-resistant woven cable sheath
Doesn't support data transfer
Dimensions:
Total Length: 1m
Outer Diameter: 3.2mm
Compatibility:
Tone2
Tone2 Maker Kit
Tone2 Pro
Useful Links
Thank you for reading this blog update! As always, please send us all your thoughts and feedback through the Khadas Community Forum!
Warmly,
Khadas Team