EDGE-V CONNECTS TO LITHIUM POLYMER BATTERIES
Juice v12 Board
Edge-V connects with the Juice board and Li-Po batteries to take your projects mobile. The Juice board uses the BQ25703ARSNR charge IC, and works with 7.4V 2-cell batteries using the Molex 537800670 connector.
CONNECT DUAL CAMERAS VIA MIPI-CSI
IMX214 13MP Camera
Edge-V is compatible out-of-the-box with the Khadas IMX214 13-MegaPixel Camera. Connect these accessories via the MIPI-CSI ports on the bottom-side of your Edge-V, and get ready for stereoscopic machine vision.
4K VPS, 4K 10-BITS, H264/H265 DECODERS AT 60 FPS
Home Theatre with Hi-Fi Audio
Edge-V is also compatible with the Khadas Toneboard, which will allow your Edge-V to output Hi-Fi audio to your external speakers.
FULL RK3399 I/O
ALL THE I/O YOU NEED IN ONE TINY SBC
 MCU: For programmable power on/off, hardware encryption EEPROM, boot media(SPI Flash or EMMC) setup, KBI etc.
 We only use Samsung or Skhynix memory for all Khadas products, lower cost solutions are available for ODM & OEM.
 RSDB: Real Simultaneous Dual Band, Edge and other devices transmit and receive data over two bands at the same time.
 Edge can support dual independent display over USB-C, HDMI, eDP or MIPI.
 WOL: Boot on or wake up Edge-V remotely over LAN through APP or webpage.
 Gesture: Can power on/off the Edge-V over gestures, this feature is disabled by default.
 GPIO: Most of the pinmap compatible with VIMs.
EDGE-V IS SMALL, BUT DOES LOTS OF THINGS
Lithium polymer battery header for mobile projects.
PCI-E M.2 Slot
Full 4-lane PCI-E M.2 slot for attaching NVMe SSDs.
Use your TV remote to control Edge-V, perfect for home theatres.
Compatible with Toneboard for HiFi audio output.
Khadas Bootloader Instructions for configuring hardware on boot.
Dual cameras via MIPI-CSI for machine vision.
Transmit and receive over 2-bands at the same time.
4K VPS, 4K 10-Bits, H264 / H265 decoders at 60 FPS.
Edge-V feels right at home in your living room, with the DIY Case.
Android P operating system.
(also runs Ubuntu LXDE)
Connect up to 3 independent displays for digital signage.
Gigabit Ethernet with Wake-On-LAN capability.
Gyroscopic sensor for detecting orientation of digital signage.
RTC + STM8S
STM8S and RTC enable timed system standby or power-on.
Install LibreELEC operating system for your HTPC setups.