Krescue which stands for "Khadas Rescue", is an extremely small 21mb operating system that gives you full control over your Khadas VIM1/2/3/3L device! Main Features: Dump EMMC memory contents to an SD card, USB, LAN host. Restore .img.gz into an EMMC on another device. View device information. Rescue shell for expert users. Shell access via UART, USB network, and LAN network. Steps to Boot Krescue: Download an appropriate image for your VIM1/2/3/3L device from dl.khadas.com.

Introduction The Khadas Tone Board has become very popular due to its great balance of high quality sound at an affordable price. Owing...

Thanks to @hyphop on Khadas Forum, we now have a specially prepared build of Lakka OS, for all VIM1 SBCs! Everything works out of the box, check out the YouTube video and links below for the ROM download and further installation instructions. More Information: Documentation: https://gist.github.com/hyphop/dc120269319402480f2d7adec2367afa ROM Download Link: https://dl.khadas.com/products/vim1/firmware/lakka/ Required Items for this Build: “VIM1 v14”: https://www.khadas.com/pro

When a 3705 Cooling Fan is installed, users may encounter a situation wherein the DIY Case cannot be closed completely. This occurs because one side of the 3705 Cooling Fan interferes with a catch on the DIY Case's top cover. This can be seen from an idealised assembly simulation, wherein a Khadas VIM3 CAD model was used. The red circle shows the interference region. Users may experience this issue, or not at all. This is dependent on the unique combination of components you'

We’ve updated the original VIM1, swapping out parts that have reached end-of-life, and improving the DRAM frequency to 912MHz. This New VIM1 v14 has already been manufactured, and is ready for immediate shipping from Khadas Shop, for the same price as the old VIM1, $44.99 (Basic), $54.99 (Pro). Pictures for Bloggers: 4K Photographs - Top, Bottom, Perspective Changes: Moved the VIN input to below the USB-C port, and changed the connector type. Changed the programmable MCU to S

Why do Edge-V & VIM3/L need an extension board for SSD drives? The M2X Extension Board is designed to mount vertically onto either the VIM3 or Edge-V SBCs, as indicated by the purple circles. As seen in the first picture, an NVMe SSD mounts neatly into the footprint of the M2X Extension Board, as it is 88mm in width. This is indicated by the green outline. In the second picture, that same NVMe SSD will not be able to fit into the footprint of either a VIM3/L or Edge-V SBC, as

Updates to the Kap Case, New VIM1 v14 and 3705 Cooling Fan